Reactor A-25

0 şərh  0 şərh  |  Şərh yaz

Məhsulun kodu: A-25

Availability: In Stock

Hava ile Çalışan Köpük Oranlayıcıları

Köpük yalıtımını püskürtmek için -dakikada 11,4 kg'ye (25 lb)

kadar uygulanabilir.

Reactor A-25, iş alanında beklediğiniz güvenilirliği sunan Graco'nun tasarladığı püskürtme köpük oranlayıcısıdır. Maksimum debilerde püskürtme yapsanız bile sabit sıcaklık kontrolü ile, daha kaliteli köpük sağlar.

  • Daha iyi verim için ısı ayar noktalarına sahiptir
  • Tek tip püskürtme kalıbı için sabit çıkış basıncı sağlar
  • Kullanımı ve bakımı kolay
  • Ekonomik ve sağlam bir çözüm arayanlar için en iyi seçim

 

Reactor A-25
Maximum Fluid Working Pressure
13 MPa/130 bar
Maximum Input Pressure to Motor
0.82 MPa/8.2 bar air
Pressure Ratio Air
16:1
Air Inlet
1/2 npsm(f)
Recommended Air Supply Hose Size
13 mm minimum
Air Consumption
0.82 MPa/8.2 bar, 6.1 lpm
Recommended Hydraulic Supply Hose Size
19 mm ID minimum
Recommended Hydraulic Return Hose Size
25 mm ID minimum
Fluid Inlets
3/4 npt(f)
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 1.75 MPa/17.5 bar maximum
Maximum Fluid Temperature
88° C
Maximum Output (10 weight oil at ambient temperature)
11 kg/min at 75 cycles/min
Output per cycle (A and B)
0.117 l
Heated Power (A and B Heaters, no hose)
10200 Watts
Sound Power, per ISO 9614–2
94.7 dB(A) at 7 MPa, 70 bar, 11.4 lpm, 15 cpm
Sound Pressure, 1 m from equipment
81 dB(A) at 7 MPa, 70 bar, 11.4 lpm, 15 cpm
Wetted Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
 
 
Line Voltage Requirement
230V 1 phase and 230V 3 phase units
195-264 Vac, 50/60 Hz
380V 3 phase units
338-457 Vac, 50/60 Hz
Fluid Outlets
Component A (ISO)
#8 JIC (3/4-16 unf), with #5 JIC adapter
Component B (RES)
#10 JIC (7/8-14 unf), with #6 JIC adapter
Reactor A-25 Plural Component Proportioner
Maximum Fluid Working Pressure
14 MPa, 138 bar
Maximum Air Supply Pressure
9 bar, 0.9 MPa
Maximum Air Working Pressure
550 kPa, 5.5 bar
Pressure Ratio
25:1
Air consumption with 02 tip at 1500 psi stall pressure
0.8m³/min
Machine Maximum Power with hose
9000 Watts
Voltage Requirement (50/60 Hz), (230 V Nominal: 195-253 VAC), (380 V Nominal: 338-457 VAC)
230 V, 1 Phase, 230 V, 3 Phase (Delta), 380 V, 3 Phase (WYE 220 V to Neutral)
Amperage Requirement (Full Load Peak)*
40 amps @ 230 V, 1 Phase, 32 amps @ 230 V, 3 Phase, 18.5 amps @ 380 V, 3 Phase
Maximum Heater Fluid Temperature
88°C
Maximum Hose Fluid Temperature
82°C
Maximum Ambient Temperature
49°C
Maximum Output
11.4 kg/min
Output Per Cycle (A and B)
0.095 ltr/cycle
Heater Power
6000 Watts
Hose Power
2790 Watts
Sound Pressure (see NXT air motor manual)
70.2 dB(A)
Sound Power (see NXT air motor manual)
80.1 dB(A)
Viscosity Range
250–1500 centipoise (typical)
Maximum Fluid Inlet Pressure
2.1 MPa, 21 bar or 15% of output pressure
Fluid Inlet/Strainer Filter
20 mesh standard
Air inlet Filter Mesh
40 Micron
Component B (Resin) Inlet
3/4 npt(f) swivel
Component A (Isocyanate) Inlet
3/4 npt(f) swivel
Recirculation/Block Hose Connections
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
Maximum Heated Hose Length ***
210 ft of 3/8 ID
Weight
140.6 kg
Wetted Parts
Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
*Full load amps with all devices operating at maximum capabilities with 210 ft (64.1 m) of hose.

 

***210 ft (64 m) of heated hose will produce the maximum allowable heat capacity. 310 ft (94 m) of heated hose may be used, but will have 25% less heat capacity.

 

 

Şərh yaz

Qeyd: HTML kodları istifadə etmək olmaz!
Pis           Yaxşı